Oganize preload and init functions and parameters (ongoing)

pulsegen_block/soc_resm_init.m

@@ -1,80 +0,0 @@
-%% Rate setup
-fs = 512e6; % Effective fs before interpolation / after decimation
-Ts = 1/fs;
-
-%% Host Sample Time in Simulation
-%TsHost = 5e-5;
-
-SamplesPerCycle = 4;
-
-FPGAClkRate = fs/SamplesPerCycle;
-TsFPGA = 1/FPGAClkRate;
-%% Tx signal generator parameters
-
-% NCO accumulator word length
-NCOAccumWL = 16;
-
-% NCO phase increment scale factor
-NCOIncScale = Ts*2^NCOAccumWL;
-
-% NCO phase increments datatype
-NCOIncDT = numerictype(1,NCOAccumWL,0);
-
-% NCO counter increment datatype
-NCOCountIncDT = numerictype(1,NCOAccumWL*2,NCOAccumWL);
-
-%% Test signal parameters
-
-% Pulse width
-pulseWidth = 8.5e-6;
-
-% Pulse start/end frequencies
-pulseCentFreq = 125e6;
-pulseBw = 50e6; % Pulse bandwidth
-
-% Number of pulses
-numPulses = 4;
-
-% Pulse repetition interval
-PRF = 20e3;
-PRI = 1/PRF;
-
-% Output gain
-pulseGenGain = 1;
-
-%% Software parameters
-
-% Signal generator update rate
-TsSW = 0.0025;
-
-%% Simulation parameters
-
-% Sim run time
-stoptime = 10*TsSW;
-
-%% Channelizer parameters
-
-% Number of channels, maximally decimated channelizer M/D=1
-%nChan = 512;
-
-% Taps per band
-%nTapsPerBand = 16;
-
-% Create channelizer object
-%channelizer = dsp.Channelizer('NumFrequencyBands',nChan,...
-%                              'DecimationFactor',nChan,...
-%                              'NumTapsPerBand',nTapsPerBand);
-% Channelizer coefficients
-%channelizerCoeffs = channelizer.coeffs.Numerator;
-
-% Channel bandwidth
-%chanBW = fs/nChan;
-
-% Starting frequency for each channel
-%chanFStart = chanBW/2:chanBW:(fs/2-chanBW/2);
-
-% Number of frames out of channelzier
-%nFrames = nChan/SamplesPerCycle;
-
-% Frame size after serializing x2
-%frameSize = SamplesPerCycle/2;