second validation of MeanPowSpec before branch to FrFT. Created slides on interface and tested several combinations of paramters. Resulds within expected.

codegen_frft/TBc_lfm_fracF.m

@@ -1,4 +1,4 @@
-%% FrFT Validation Script (Reference vs Original)
+  %% FrFT Validation Script (Reference vs Original)
 % Author: Canisio Barth
 
 clear; clc; close all;

docs/pl_tx_subsystem.md

@@ -18,16 +18,16 @@ and operates deterministically in the PL after a trigger from the PS.
 
 ## Architecture
 
-TxPulseStart (PS)
-        ↓
-pulse_gen_ctrl (FSM)
-        ↓
-   tx_active
-        ↓
-Phase Increment Logic
-        ↓
-      NCO (DDS)
-        ↓
+TxPulseStart (PS)  
+        ↓  
+pulse_gen_ctrl (FSM)  
+        ↓  
+   tx_active  
+        ↓  
+Phase Increment Logic  
+        ↓  
+      NCO (DDS)  
+        ↓  
    Complex Output (I/Q)
 
 ---

utilities/soc_rfsoc_init.m

@@ -25,7 +25,7 @@ NCOCountIncDT = numerictype(1,NCOAccumWL*2,NCOAccumWL);
 
 % Pulse start/end frequencies
 pulseCentFreq = 0e6;
-pulseBw = 50e6; % Pulse bandwidth
+pulseBw = 40e6; % Pulse bandwidth
 
 % Number of pulses
 numPulses = 10;
@@ -34,9 +34,10 @@ numPulses = 10;
 PRF = 7.5e3;
 PRI = 1/PRF;
 
+
 % Pulse time duration
 %pulseT = 10; % use very long pulse help emulate CW
-pulseT = 10e-6;
+pulseT = 20e-6;
 
 % CW mode (bypass pulse generation)
 %CwMode = false;
@@ -53,10 +54,10 @@ bd = bdroot; % Retrive which model is calling this function
 switch bd
     case 'soc_rfsoc_top'
         TsSW = 0.0005; % Signal generator and capture update rate
-        StopTime = 0.0025; % Simulation total time
+        StopTime = 0.025; % Simulation total time
     case 'gm_soc_rfsoc_top_sw'
-        TsSW = 0.5;
-        StopTime = 10;
+        TsSW = 0.25;
+        StopTime = 250;
     otherwise
         error('rfsoc_init: InvalidModel (%s not supported).', bd);
 end