FrFT not working (for each error)

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/IYUg9GI8QpDmyAvmDmvwktdmhjEd.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info Ref="codegen_frft/codegen/mex/fracF_cg/interface" Type="Relative"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/IYUg9GI8QpDmyAvmDmvwktdmhjEp.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info location="4a7e46c8-b608-4097-9e1f-6b08f40b724c" type="Reference"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/N9n74IL2KrtysYy1MJ3GXg0B9cwd.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info Ref="codegen_frft/codegen" Type="Relative"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/N9n74IL2KrtysYy1MJ3GXg0B9cwp.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info location="7593a6a4-6687-4364-8723-1bc8794d0177" type="Reference"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/SmoDhotSC9DRW6RAWIZ3HhfJ1Gkd.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info Ref="codegen_frft/codegen/mex" Type="Relative"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/SmoDhotSC9DRW6RAWIZ3HhfJ1Gkp.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info location="732585ee-100e-439f-988e-c97de5008a4c" type="Reference"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/XNALo81LXKoPpl_sWox0XlMZwrgp.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info location="a92ac691-f104-48a3-8517-c0b00eec410f" type="Reference"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/yHR9AGbyWFGhYHIDxoJYqebuMa8p.xml

@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Info location="c2875307-deb1-4e40-b64d-d77c1eb908cb" type="Reference"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/yPxdZXCe9dRoqAjp-aSxSvfCy5Ed.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info Ref="codegen_frft/codegen/mex/fracF_cg" Type="Relative"/>

resources/project/EEtUlUb-dLAdf0KpMVivaUlztwA/yPxdZXCe9dRoqAjp-aSxSvfCy5Ep.xml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Info location="81080468-b05c-494e-b13d-b9983b9ef350" type="Reference"/>

utilities/soc_rfsoc_init.m

@@ -25,7 +25,7 @@ NCOCountIncDT = numerictype(1,NCOAccumWL*2,NCOAccumWL);
 
 % Pulse start/end frequencies
 pulseCentFreq = 0e6;
-pulseBw = 50e6; % Pulse bandwidth
+pulseBw = 32e6; % Pulse bandwidth
 
 % Number of pulses
 numPulses = 10;
@@ -34,9 +34,10 @@ numPulses = 10;
 PRF = 7.5e3;
 PRI = 1/PRF;
 
+
 % Pulse time duration
 %pulseT = 10; % use very long pulse help emulate CW
-pulseT = 10e-6;
+pulseT = 32e-6;
 
 % CW mode (bypass pulse generation)
 %CwMode = false;
@@ -53,10 +54,10 @@ bd = bdroot; % Retrive which model is calling this function
 switch bd
     case 'soc_rfsoc_top'
         TsSW = 0.0005; % Signal generator and capture update rate
-        StopTime = 0.0025; % Simulation total time
+        StopTime = 0.025; % Simulation total time
     case 'gm_soc_rfsoc_top_sw'
-        TsSW = 0.5;
-        StopTime = 10;
+        TsSW = 0.25;
+        StopTime = 250;
     otherwise
         error('rfsoc_init: InvalidModel (%s not supported).', bd);
 end
@@ -82,8 +83,17 @@ channelizerCoeffs = channelizer.coeffs.Numerator;
 %Starting frequency for each channel
 %chanFStart = chanBW/2:chanBW:(fs/2-chanBW/2);
 
-%Number of frames in the DPW
-nFrames = 1024;%nChan/SamplesPerCycle;
+%% Frame and DPW capture parameters 
+samplesFrame = 512; % number of samples in one frame
+
+TFrame = samplesFrame*Ts_eff; % time duration of a frame
+
+%Number of frames in the DPW
+nFrames = 1024;
+
+%% FrFT tests
+pulseBeta = pulseBw/pulseT; % chirp-rate in Hz/s
+
+aMatch = -(2/pi)*(atan(fs_eff/(pulseBeta*TFrame)));
+%aMatch = -(2/pi)*(atan(fs_eff/(pulseBw*pulseT)));
 
-% Frame size after serializing x2
-%frameSize = SamplesPerCycle/2;

utilities/soc_rfsoc_prj_startup.m

@@ -1,8 +1,24 @@
 %% Startup Tasks
 %
-% Configure HDL Coder to use Xilinx Vivado for HDL workflows.
+% Configure HDL Coder to use Xilinx Vivado for HDL workflows
+% only when Vivado is installed on this machine.
 %
-hdlsetuptoolpath('ToolName','Xilinx Vivado', ...
-                 'ToolPath','/tools/Xilinx/Vivado/2024.1/bin/vivado');
 
-%% 
+vivadoPath = '/tools/Xilinx/Vivado/2024.1/bin/vivado';
+
+if exist(vivadoPath, 'file') == 2
+
+    hdlsetuptoolpath( ...
+        'ToolName', 'Xilinx Vivado', ...
+        'ToolPath', vivadoPath);
+
+    fprintf('[FrFT Project] Vivado detected. HDL workflow enabled.\n');
+
+else
+
+    warning([ ...
+        '[FrFT Project] Vivado not found.\n' ...
+        'HDL synthesis / bitstream generation disabled.\n' ...
+        'Project running in MATLAB/Simulink modeling-only mode.']);
+
+end