canisio
041218aa7f
test MeanPowSpec on ZCU111
2026-04-29 16:35:55 -03:00
canisio
d9f7798814
Added Mean Power Spectrum calculation on PS
2026-04-29 16:10:21 -03:00
canisio
65cef793ac
Removed RMS and Fmax outputs
...
Formatted top diagrams
2026-04-29 11:30:02 -03:00
canisio
99c6b62fc6
Added CwMode as toggle switch
2026-04-29 10:44:14 -03:00
canisio
b3ba729f8b
Pulsed input LFM tested on board. Appears ok on both channelizer and bypass.
2026-04-28 17:43:45 -03:00
canisio
c7cb4e770f
Simulated with pulsed signal before testing on ZCU111
2026-04-28 16:31:04 -03:00
canisio
6093942ab3
include check scripts to the project.
...
changed pulseWidth to pulseT.
2026-04-28 15:22:03 -03:00
canisio
edef1dbed3
validation: add checkCounterSamples and verify capture up to 1024 frames on ZCU111
...
Created checkCounterSamples.m to validate sample continuity, counter wraps,
and frame index progression. Verified counter bypass, sine bypass, and
channelizer modes up to nFrames=1024 across 10 DPWs on ZCU111.
2026-04-27 18:32:31 -03:00
canisio
4216288e2a
Removed delays from bypass
...
Removed visualisation from PS
DPW visualization and log outside PS (external mode)
2026-04-27 12:09:46 -03:00
canisio
df335aac1e
validation: verified capture pipeline in counter bypass, sine bypass, and sine channelizer modes (nFrames=8)
...
Validated end-to-end data integrity and visualization across all modes.
2026-04-25 12:58:22 -03:00
canisio
f9a2eff397
validate sine over bypass using a post processing script in the logged data. Added folter post_processing and script checkTimeSamples
2026-04-25 11:28:43 -03:00
canisio
ff3aa5e89f
Revert "Created valid_out for conter input test"
...
This reverts commit a7e710b603
2026-04-24 17:25:45 -03:00
canisio
a7e710b603
Created valid_out for conter input test
2026-04-24 16:36:13 -03:00
canisio
2b7d05b3d9
FPGA Packer: Changed to uint128, changed endianess order of packing (selectors 4,3,2,1)
2026-04-24 11:59:16 -03:00
canisio
bbf87121f0
changed to upper and lower halves after stream read. No difference (only first lane of 4x1 being read)
2026-04-23 15:26:22 -03:00
canisio
525a5f65e5
unchecked "enable sample packing" on signal attributes of AXI4-stream to software
2026-04-23 08:53:01 -03:00
canisio
9a7a05f450
stream read read only first sample of [4 x 1] bundle
2026-04-22 16:38:16 -03:00
canisio
0df1044d13
Input test counter moved to Rx Subsystem
2026-04-22 14:37:28 -03:00
canisio
9a0404f1a9
4 dalay on the signals of bypass to align test counter to frame start. Appears to be working. Test on board.
2026-04-22 10:30:14 -03:00
canisio
4ad5c3c5ea
appear to be working with 4 daley after multi-frame capture. Problem is on visualization,
2026-04-21 16:19:43 -03:00
canisio
4b1b94c424
Added counter mode as input, real part = sample counter, imag part = frame counter. Reset on software trigger
2026-04-21 12:25:21 -03:00
canisio
78a7d1ae68
updated interface model. Still not working
2026-04-21 10:00:38 -03:00
canisio
7f369d8692
runs on the board. But capture is not in sync
2026-04-20 17:09:57 -03:00
canisio
286c464f5a
set SoCData as datatype again on the stream read inport (I dont know if this was the problem, but its working again)
2026-04-20 15:04:14 -03:00
canisio
b2ce956f41
Multi-frame capture integrated into full design with trigger-controlled DPW; AXI stream (uint32 [4x1]) and DMA framing aligned; fixed FSM termination condition (no overflow); validated end-to-end (PL→DMA→PS) using counter input for multiple nFrames
2026-04-17 17:03:34 -03:00
canisio
ce87190fba
If sw side of AXI4-Stream to Software block is set to fixdt(128), frames appear to be arriving correctly on PS. However, reinterpretation is failing when using option "uint32"
2026-04-17 11:33:18 -03:00
canisio
15f20619b1
MultiFrame camputre PL part integrated (no test, no PS)
2026-04-16 17:25:28 -03:00
canisio
88e9df3dbb
Multi-frame capture (trigger-controlled DPW) validated in testbench; added 128-bit packer replacing serializer, correct unpacking (SI reinterpret) and frame reconstruction verified (counter + PFB); implemented VALID gating (zero when idle) and AXI-aligned pipelining; nFrames parameterized in TB
2026-04-16 16:44:44 -03:00
canisio
2b8f8de030
Validation of multiframe on TBm_capture done.
2026-04-15 17:52:09 -03:00
canisio
9fd110f451
Replace serializer with 128-bit packer and add MultiFrameCapture (testbench)
...
Removed FIFO serializer and implemented 128-bit AXI packing (4 samples/beat)
Added initial MultiFrameCapture FSM
Validated with counter input
Sine/channelizer validation pending (frame interpretation update needed)
2026-04-14 17:56:57 -03:00
canisio
aad231b55a
AXI with 128 bits and no serializer appears to be working
2026-04-14 16:46:18 -03:00
canisio
d83006c50c
Added counter as input for the TBm_capture
2026-04-14 10:32:02 -03:00
canisio
5e5bba3ce6
Stable 16-bit Q1.15 Rx chain before AXI width upgrade
2026-04-14 09:25:01 -03:00
canisio
ccc6b9cd73
Validate 16-bit Q1.15 Rx chain (baseline, partial validation)
...
Standardized ADC/DAC and channelizer input to fixdt(1,16,15)
Rescaled channelizer output from sFix25_En23 to 16-bit complex
Verified channelizer path and spectrum behavior in full simulation
Bypass path and datatype tuning (coefficients/output) pending validation
2026-04-13 17:47:08 -03:00
canisio
4241699c3d
TBm_caputre. changed PFB internals and output datatype
2026-04-09 12:43:32 -03:00
canisio
d4e53a67ee
Stable single frame (512 samples) baseline before capture redesign
2026-04-09 09:27:44 -03:00
canisio
520a37f520
CW mode integrated to design
2026-04-08 15:00:47 -03:00
canisio
cd91e3066b
added CW mode (with LFM) to the chirp block (TB, not integrated yet)
2026-04-08 12:19:03 -03:00
canisio
5a3bc8891d
cleaned up log signals (still not working)
2026-04-07 09:26:50 -03:00
canisio
84b795203a
pulse generator integrated but not working
2026-04-06 16:16:42 -03:00
canisio
ada7e324cd
Fixed register address on "update parameters"
2026-04-06 15:15:55 -03:00
canisio
7813d9744c
Modified PS part and interface towards pulse generation integration
2026-04-06 12:26:06 -03:00
canisio
3c6ae0cfe9
finished organization of init funcions and parameters
2026-04-04 16:05:17 -03:00
canisio
eb14676581
Oganize preload and init functions and parameters (ongoing)
2026-04-04 15:16:58 -03:00
canisio
ac2e7bcece
Initial
2026-03-24 12:44:45 -03:00
