canisio
286c464f5a
set SoCData as datatype again on the stream read inport (I dont know if this was the problem, but its working again)
2026-04-20 15:04:14 -03:00
canisio
91b02cdc79
organized register... stopped working
2026-04-20 11:53:26 -03:00
canisio
0b1dc081e5
commented display on PS, before testing in the board
2026-04-20 10:51:08 -03:00
canisio
d8fe924f6e
tests before trying in the board
2026-04-20 10:49:21 -03:00
canisio
b2ce956f41
Multi-frame capture integrated into full design with trigger-controlled DPW; AXI stream (uint32 [4x1]) and DMA framing aligned; fixed FSM termination condition (no overflow); validated end-to-end (PL→DMA→PS) using counter input for multiple nFrames
2026-04-17 17:03:34 -03:00
canisio
fc50e71ab5
AXI stream updated to uint32 [4x1] format; samples-per-frame aligned to nFrames×512; PS stream read configured accordingly; single-frame (nFrames=1) validated end-to-end (PL→DMA→PS) with correct unpacking and data integrity
2026-04-17 12:22:12 -03:00
canisio
ce87190fba
If sw side of AXI4-Stream to Software block is set to fixdt(128), frames appear to be arriving correctly on PS. However, reinterpretation is failing when using option "uint32"
2026-04-17 11:33:18 -03:00
canisio
cb56e78923
changed folder name for all testbench models
2026-04-17 08:31:14 -03:00
canisio
a3d46a9113
New register MF_nFrames added to PS (initialize and data genearation/capture). Not tested
2026-04-16 17:35:10 -03:00
canisio
15f20619b1
MultiFrame camputre PL part integrated (no test, no PS)
2026-04-16 17:25:28 -03:00
canisio
88e9df3dbb
Multi-frame capture (trigger-controlled DPW) validated in testbench; added 128-bit packer replacing serializer, correct unpacking (SI reinterpret) and frame reconstruction verified (counter + PFB); implemented VALID gating (zero when idle) and AXI-aligned pipelining; nFrames parameterized in TB
2026-04-16 16:44:44 -03:00
canisio
beb5410390
added visualisation to validate ouput of multiple frames
2026-04-16 11:56:25 -03:00
canisio
2b8f8de030
Validation of multiframe on TBm_capture done.
2026-04-15 17:52:09 -03:00
canisio
9fd110f451
Replace serializer with 128-bit packer and add MultiFrameCapture (testbench)
...
Removed FIFO serializer and implemented 128-bit AXI packing (4 samples/beat)
Added initial MultiFrameCapture FSM
Validated with counter input
Sine/channelizer validation pending (frame interpretation update needed)
2026-04-14 17:56:57 -03:00
canisio
aad231b55a
AXI with 128 bits and no serializer appears to be working
2026-04-14 16:46:18 -03:00
canisio
3748b65872
implemented sample packer to construct 128 AXI. Partially working (only bypass works?)
2026-04-14 12:25:01 -03:00
canisio
d83006c50c
Added counter as input for the TBm_capture
2026-04-14 10:32:02 -03:00
canisio
5e5bba3ce6
Stable 16-bit Q1.15 Rx chain before AXI width upgrade
2026-04-14 09:25:01 -03:00
canisio
ccc6b9cd73
Validate 16-bit Q1.15 Rx chain (baseline, partial validation)
...
Standardized ADC/DAC and channelizer input to fixdt(1,16,15)
Rescaled channelizer output from sFix25_En23 to 16-bit complex
Verified channelizer path and spectrum behavior in full simulation
Bypass path and datatype tuning (coefficients/output) pending validation
2026-04-13 17:47:08 -03:00
canisio
f221e14c2c
updated Rx documentation
2026-04-13 16:47:42 -03:00
canisio
a01186484e
Rx: standardize to Q1.15 and reduce channelizer output to 32-bit complex
...
- ADC/DAC set to fixdt(1,16,15)
- Channelizer output scaled from sFix25_En23 to Q1.15
- Data width reduced from 50b to 32b
- Validated channelizer and bypass paths
Model: TBm_capture.slx
2026-04-13 16:47:25 -03:00
canisio
4241699c3d
TBm_caputre. changed PFB internals and output datatype
2026-04-09 12:43:32 -03:00
canisio
d4e53a67ee
Stable single frame (512 samples) baseline before capture redesign
2026-04-09 09:27:44 -03:00
canisio
2e570cee8b
Created folder and test bench model for new capture block. Copied from current version.
2026-04-08 15:50:59 -03:00
canisio
f8edb31dc2
updated doc: Tx subsystem
2026-04-08 15:04:15 -03:00
canisio
520a37f520
CW mode integrated to design
2026-04-08 15:00:47 -03:00
canisio
cd91e3066b
added CW mode (with LFM) to the chirp block (TB, not integrated yet)
2026-04-08 12:19:03 -03:00
canisio
5a3bc8891d
cleaned up log signals (still not working)
2026-04-07 09:26:50 -03:00
canisio
fdde9ec62b
Initiliaze funcion back to 1 (in the toggle registers). Still not working
2026-04-06 17:39:05 -03:00
canisio
84b795203a
pulse generator integrated but not working
2026-04-06 16:16:42 -03:00
canisio
ada7e324cd
Fixed register address on "update parameters"
2026-04-06 15:15:55 -03:00
canisio
7813d9744c
Modified PS part and interface towards pulse generation integration
2026-04-06 12:26:06 -03:00
canisio
05b74503dc
Fixed init callback for pulse gen testbench
2026-04-06 10:45:21 -03:00
canisio
72b9a34db9
Ready to move from sine to pulse generator (Tx Subsystem)
2026-04-06 10:23:23 -03:00
canisio
3c6ae0cfe9
finished organization of init funcions and parameters
2026-04-04 16:05:17 -03:00
canisio
eb14676581
Oganize preload and init functions and parameters (ongoing)
2026-04-04 15:16:58 -03:00
canisio
040834d511
added docs folder to project path.
...
tested remotely. OK
2026-04-03 20:47:13 -03:00
canisio
a92709b500
Added bypass of channelizer to the documentation
2026-04-02 17:39:01 -03:00
canisio
27ec12161c
detailed subsystems
2026-04-02 17:36:23 -03:00
canisio
5caaa7fd9a
updated README
2026-04-02 17:32:03 -03:00
canisio
ea0ecefae1
Added documentation and updated README
2026-04-02 17:29:24 -03:00
canisio
e810145620
Pulse Generator TB validated
2026-04-02 17:08:44 -03:00
canisio
a82aed0d5a
Changed NCO to complex on TBm_chirp
2026-04-02 16:43:03 -03:00
canisio
62ab58b741
Changed Update parameter subsystem on chirp TB to pulse fc and pulse BW.
2026-04-02 16:28:41 -03:00
canisio
8e397fa41e
Added draft to TBm_chirp model. Added init function script to testbench
2026-04-02 12:03:59 -03:00
canisio
790c2fdb37
added placeholder for chirp block
2026-04-01 12:05:57 -03:00
canisio
872fbfcd6e
Minor changes
2026-04-01 11:51:59 -03:00
canisio
9794b2d540
tested on HW. Bypass ok.
2026-03-31 18:47:13 -03:00
canisio
b72a8cd616
added time scope to interface
2026-03-31 18:00:27 -03:00
canisio
f66c3ffd06
Changed interface model to reflect bypass
2026-03-31 17:51:26 -03:00
